Tremolos & Partes > 

Bigsby

trenner
Bild1
Chrome. For thin acoustic-electric guitar.
Detalles
No.Art.
Descripción
  Precio 
Encargar
3621C verchromt
179,00 EUR
Bild1
Chrome. For thicker archtop guitars.
Detalles
No.Art.
 
  Precio 
Encargar
3624C  
189,00 EUR
Bild1
Contains tremolo, bridge, bridge plate and all required parts to install the tremolo on a Tele®. Instructions included.
 
Detalles
No.Art.
 
  Precio 
Encargar
3629C  
198,00 EUR
Bild1
Chrome. For solidbody guitars. The base of the vibrato is 108mm long and 92mm wide.
Detalles
No.Art.
 
  Precio 
Encargar
3620C  
149,00 EUR
Bild1
Chrome. For thin acoustic-electric guitar. Same as B7 but no string tension bar.
Detalles
No.Art.
Descripción
  Precio 
Encargar
3622C chrome
149,00 EUR
3662c
The Vibramate String Spoiler is a little bracket designed to fit right onto your existing Bigsby vibrato without any modifications or special tools. It easily slips right into place and is held in position by the tension of the strings when tuned to pitch. The Spoiler makes string changes easy. No more need for wrapping the strings around and under the vibrato roller with needle-nose pliers in an attempt to get the ball onto that little pin. Now your strings will drop right into place. The Vibramate String Spoiler is designed to maintain the same smooth operation and feel of the classic Bigsby vibrato and may even increase the potential range of pitch bending. The fulcrum position eliminates unwanted radial strain to the ball end string wrap.
Detalles
No.Art.
 
  Precio 
Encargar
3664C  
39,00 EUR
3662c
The Vibramte V5 Short Tail Mounting Kit is for mounting a Bigsby B5 Original Vibrato (without drilling any holes) and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The Kit includes the mounting plate with felt-pads on the bottom for a soft touch to the top of your guitar as well as US and Metric threaded mounting hardware.
Detalles
No.Art.
 
  Precio 
Encargar
3663C  
63,00 EUR
3662c
With the Vibramate V7-LP Kit you can install a Bigsby Vibrato on acarved top Les Paul guitar without drilling any holes. The Kit isdesigned for a Bigsby B7 Original Vibrato and will fit most StandardCarved Top Les Paul guitars with Stop Tailpiece and Tune-O-Matic Bridge.
TheKit includes the "Dogbone" mounting plate with felt-pads on the bottomfor a soft touch to the top of your guitar as well as a felt-paddedTailpiece Plate for mounting the Hinge-Plate of the Bigsby B7 to theStrap Pin hole at the lower end of your guitar. Also included: both USand Metric threaded mounting hardware.
Detalles
No.Art.
 
  Precio 
Encargar
3662C  
66,00 EUR
Bild1
Adjustable aluminium bridge. The center height is adjustable from 17,5mm to 25,5mm and the radius is 12". The bridge is compensated for wound G string. 
Detalles
No.Art.
 
  Precio 
Encargar
3633C  
31,80 EUR
Bild1
Chrome. Screws included. This plate is required if you want to set up your Tele® with a Bigsby-style tremolo.
Detalles
No.Art.
 
  Precio 
Encargar
3637C  
36,90 EUR
Bild1
This round arm fits on Bigsby tremolos. The lenght is adjustable.
Detalles
No.Art.
Descripción
  Precio 
Encargar
3630C Nickel, Lenght: 18,5 cm
23,50 EUR
3630G Gold Finish, Lenght: 18,5cm
26,90 EUR
Bild1
22 x 19mm
Detalles
No.Art.
 
  Precio 
Encargar
36200  
8,90 EUR
Todos los precios incluyen el IVA alemán actual (19%).