No results were found for the filter!
Kluson Traditional "No-Line" Tuner
For machine heads with slotted shafts, the string gets cutt off about 5cm behind the respective machine head, inserted at the top, bent over to the side and then wrapped around the shaft. When tuned, there should be about 2 or 3 windings...
From €35.00
Kluson Traditional "No-Line" Tuner
For machine heads with slotted shafts, the string gets cutt off about 5cm behind the respective machine head, inserted at the top, bent over to the side and then wrapped around the shaft. When tuned, there should be about 2 or 3 windings...
€35.00
Kluson Back Lock Tulip
3-left/3-right Required peghole: 10mm Ratio: 18:1 String post lenght: 31mm Distance from baseplate to string hole: 20mm Weight per piece: 33g
From €69.00
Kluson Deluxe Single Line Stamp, 6-R
For machine heads with slotted shafts, the string is snipped off about 5cm behind the respective machine head, inserted at the top, bent over at the side and then wrapped around the shaft. When tuned, there should be approximately 2-3...
€52.00
