Kluson Roundbacks CTM LOCKHEAD, 6-R

  • 0484C
  • 55,00 €

    :

    Farbe

    No.Art.
    Precio
    Bestellmenge
    0484C Chrome
    De 1
    55,00 €
    0484S Black
    De 1
    49,00 €
    • 6-right, for 10mm-diameter pegholes, 18:1 ratio. With LOCKHEAD locking system. Mounting screws and threaded hex bushings included.

       

      • 6-right
      • Required peghole: 10mm
      • Ratio: 18:1
      • String post lenght: 31,5mm
      • Distance from baseplate to string hole: 19,5mm
      • Weight per piece: 29g

    This is how the Kluson Lockhead system works: First you have to pull the string through the hole in the shaft until the string lies tightly on the frets. When you tighten the upper cylinder counterclockwise with a coin (5 euro cents), a small pin inside the shaft tightens the string. Now you can start tuning.
    All Kluson lockheads have one ingenious point: you can't unscrew the shaft's cylinder because it ends up in an open loop. That means the cylinder can't fall off and get lost!

    Más elecciones
    Stab Side Dots Stab Side Dots
    De 1,20 €
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Output Jacks Output Jacks
    De 2,90 €
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Neck Plates Neck Plates
    De 4,40 €
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Sunk Sunk
    De 10,90 €
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Binding Binding
    De 7,40 €
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones
    Más elecciones