Göldo Traditional Tuner, 6-L, Antique

Pour profiter de toutes les fonctionnalités de Rockinger Guitars, nous vous conseillons d'activer Javascript dans votre navigateur.

Rockinger Quality Control

Due to the fact that we buy our guitars in reasonable quantities (nope, we don't have "100s and 100s guitars in stock") we can offer you the best possible quality control.

All instruments are being critically viewed, checked, test played and adjusted. Right before the guitar is being shipped it will be checked again and only if everything is 100% OK it will leave our store.

Rest assured that every guitar bought in our store will be checked at least twice, no matter if it costs 400 or 4.000 Euros.

Rockinger Professional Guitar Kits

Due to our high-quality components these guitar kits can easily be turned into professional electric guitars, that are absolutely competitive on the market, only at a much lower price. Generally we offer our kits in 2 different styles, each of them in finished and unfinished versions.

Premium Guitar Kits
Contain the body, neck, the complete hardware, pickguard, knobs, strings, the complete electric components, but no pickups. Most suitable if you have a spare set of Pickups stored somewhere. Now you can use them on a superb brandnew guitar for a low budget.

Premium Plus Guitar Kits
These are the versions, that also contain a set of our well-known pickups. Of course also for an unbeatable price!

Deal, deal, deal!
We assembled the Rockinger Professional Kits in the best sense and suitable way in our opinion. ...and you save quite an amount compared to the price the components cost if you buy them separately. For a better overview we also wrote the regular overalamount of all components to the kits - so you can easily see right away how much you will actually save, lucky you!

Numéro d'article 1407A

49,00 €

Désignation
Antique Finish. 6-left, for 8, 5mm pegholes, 15:1 ratio. Slotted shaft. With "Goeldo Deluxe" stamp. Mounting screws and press-fit peghead bushings included.
- 6-left
- Required peghole: 8,5mm
- Ratio: 15:1
- String post lenght: 25,5mm
- Distance from baseplate to string hole: 20mm
- Weight per piece: 20g

Plus d'informations

For machine heads with slotted shafts, the string gets cutt off about 5cm behind the respective machine head, inserted at the top, bent over to the side and then wrapped around the shaft. When tuned, there should be about 2 or 3 windings on the shaft.